| Item | Project | Unit | Specifications |
| Travel | X-axis | mm | 4200 |
| Y-axis + tool change stroke | mm | 3350 | |
| Z-axis | mm | 1000 (Optional 1200) | |
| Spindle nose to table | mm | 300-1300 | |
| Gantry width | mm | 2700 | |
| Spindle centre to column | mm | / | |
| Work bench | Table size | mm | 4000*2300 |
| T-slot (size * number of slots * spacing) | mm | / | |
| Maximum load | T | 18 | |
| Spindle | Spindle taper | / | BT50-190 (long nose) |
| Rotation speed | rpm | 6000 | |
| Maximum spindle output torque | N.m | 770/1089 | |
| Transmission method | / | Direct-junction + two-speed gearbox | |
| Gear ratio | / | 1:1，1:4 | |
| Feed | Cutting feed (XYZ) | mm/min | 1-8000 |
| Rapid feed (XYZ) | m/min | 10/12/12 | |
| Accurate | X-axis positioning accuracy (full travel) | mm | 0.035 |
| Y-axis positioning accuracy (full stroke) | mm | 0.025 | |
| Z-axis positioning accuracy (full travel) | mm | 0.015 | |
| X-axis repeatability | mm | 0.023 | |
| Y-axis repeatability | mm | 0.015 | |
| Z-axis repeatability | mm | 0.015 | |
| Electrical machinery | Control system | / | FANUC 0I-MF |
| Mitsubishi M80A | |||
| Spindle motor power | Kw | 22/26 | |
| Three-axis motor power X/Y/Z | Kw | 6.0/7.0/7.0 | |
| Others | Required air pressure | Kgf/cm² | 6.5 |
| Tank capacity | L | / | |
| Electricity demand | KVA | 60 | |
| Overall dimensions | mm | / |
Gantry machining centreLM-4228
For more product information please contact us
+86-551-64842750
+86-138-6616-4848
youngso@163.com
Product parameter