| Item | Project | Unit | Specifications |
| Scope of processing | Worktable area (front and rear * left and right) | mm | 6000*800 |
| Maximum grinding area (horizontal sub-bed) | mm | 4560*150 | |
| Disc area | mm | 1560*12 (type 25) | |
| Maximum worktable load (with disk) | kg | 4500 | |
| Distance from disc surface to work surface | mm | 207.8 | |
| Double spindle opening distance | mm | Min.500- Mnx 760 | |
| Distance from top of grinding wheel to magnetic table (Z-axis) | mm | Min.180-Mex 240 | |
| Distance from the underside of the grinding wheel to the magnetic table (secondary axis) | mm | Min.-28-Max 320 | |
| Double spindle | Motor | kw | 22.5 |
| Spindle type | / | Dynamic and static spindles | |
| Spindle speed | rpm | 0-1500 | |
| X-feed (table) | Grinding Wheel (OD*Thickness*ID) | mm | 600x18-66x304.8 |
| Course | mm | 5500 | |
| Runners | Ball Wire Rails | ||
| Feedrate | m/min | 30-50 | |
| Motor | kw | CE260A12N1-AT02 | |
| Drive | Linear motors | ||
| Y/V feed (vertical head dual axis) | Course | mm | 300 |
| Ball screw (diameter*pitch) | mm | 40*5P | |
| Motor | kw | 2 | |
| Movement speed | m/min | 6 | |
| Minimum setting unit | mm | 0.001 | |
| Runners | Type 55 Roller Slide | ||
| Sizes | Machine dimensions (without water dispenser attachment) | mm | 14600L*3650W2800H |
| Floor space | mm | 15000L*6000W4000H | |
| Packing size (without water dispenser accessories) | mm | 15000L*4100W3200H | |
| Weights | Machine weight (without water dispenser accessories) | kg | Approx. 35,000 (subject to final shipment) |
| Z-axis up and down (vertical head rollers) | Stroke | mm | 130 |
| Ball screw(diameter*pitch) | mm | 40*5P | |
| Servo motor | kw | 2 | |
| Travelling speed | m/min | 6 | |
| Minimum setting unit | mm | 0.001 | |
| Track | Type 55 Roller Slide | ||
| Wheel Dresser | Grinding wheel (OD*Thickness*ID) | mm | (120*40*52) Mating rail size |
| Maximum speed | rpm | 2500 | |
| Servo motor | kw | 2 | |
| Spindle form | Bearing type spindle | ||
| Horizontal subspindle | Spindle type | Dynamic and static spindles | |
| Motor | kw | 7.5 | |
| Spindle speed | rpm | 0-1000 | |
| Grinding wheel (OD*Thickness*ID) | mm | 405*50*127 | |
| Horizontal vice-axis forward and backward feed (A-axis) | Stroke | mm | 300 |
| Ball screw (diameter*pitch) | mm | 40*5P | |
| Servo motor | kw | 2 | |
| Travelling speed | m/min | 6 | |
| Minimum setting unit | mm | 0.001 | |
| Track | Type 55 roller slide | ||
| Horizontal sub-axis up and down feed (C-axis) | Stroke | mm | 300 |
| Ball screw (diameter*pitch) | mm | 40*5P | |
| Servo motor | kw | 2 | |
| Reduction ratio | 1:5 | ||
| Travelling speed | m/min | 6 | |
| Minimum setting unit | mm | 0.001 | |
| Track | Type 55 roller slide | ||
Tainuo grinding machineXGM-453
For more product information please contact us
+86-551-64842750
+86-138-6616-4848
youngso@163.com
Product parameter